| Title | Value |
|---|---|
| PRE/MAIN section | PRE/MAIN section |
| Minimum RMS output : | 2x 80W (4 Ohm, 20...20Khz) |
| 2x 70W (8 Ohm, 20...20Khz) | |
| Continuous RMS power : | 2x 90W (4 Ohm) |
| Both channels driven (1Khz) : | 2x 75W (8 Ohm) |
| Power bandwidth (IHF) : | 10Hz...50Khz (at 0,05% THD) |
| Damping factor (1Khz) : | 40 (8 Ohm) |
| THD (phono to Rec Out) : | 0,01% (7,5V output) |
| THD (Aux, Tape to SP out) : | 0,02% @ 35W |
| THD (Main In to SP Out) : | 0,015% @ 35W |
| IM distortion : | 0,05% @ 70W |
| Input sensitivity : | 2mV / 47kOhm (Phono MM) |
| 120mV / 45kOhm (Aux, Tape 1&2) | |
| 775mV / 100kOhm (Main In terminals) | |
| Maximum input levels : | 230mV (1Khz, Phono MM) |
| Output level (Rec Out, Phono) : | 120mV / 500 Ohm (rated) |
| 15V (max, 1Khz) | |
| Output level (Pre Out (rated) : | 775mV / 750 Ohm |
| 5V max. | |
| Frequency response : | ± 0,2dB RIAA |
| 10Hz...100Khz (Aux, Tape 1&2 to SP out, ± 2,5dB) | |
| 10Hz...100Khz (Main In to SP out, ± 2,5dB) | |
| Bass turnover frequency : | 350Hz |
| Bass boost/cut : | ± 15dB at 50Hz |
| Treble turnover frequency : | 3,5Khz |
| Treble boost/cut : | ± 10dB at 20Khz |
| Presence boost/cut : | ± 6dB at 6Khz |
| Filters : | low: 15 or 70Hz (12dB/oct.) |
| high: 8 or 12Khz (12dB/oct.) | |
| Loudness : | level-related equalization |
| S/N ratio (IHF-A) : | 95dB (Phono MM / 10mV / shorted) |
| 100dB (Aux, Tape 1&2 / 5,1kOhm / shorted) | |
| 112dB (Main / 5,1kOhm / shorted) | |
| NDCR (IHF-A) : | for 0,1% into 8Ohm 20Hz to 20Khz from 100mW to 70W |
| (Vol -20dB, Phono to SP Out) | |
| Meter range : | 100mW to 200W into 8Ohm |
| FM section | FM section |
| Tuning range : | 88 to 108MHz |
| Usable sensitivity (300 Ohm) : | 10,3dBf (1,8µV) |
| Usable sensitivity (75 Ohm) : | 10,3dBf (0,9µV) |
| 50dB quieting sensitivity (Mono) : | 15,3dBf (3,2µV) |
| 50dB quieting sensitivity (Mono) : | 37,2dBf (40µV) |
| Alternate channel selectivity : | 80dB (IHF) |
| Image response ratio (98MHz) : | 85dB |
| IF response ratio (98MHZ) : | 90dB |
| Spurious response ratio (98MHz) : | 100dB |
| AM suppression (IHF) : | 65dB |
| Capture ratio : | 1,0dB |
| S/N ratio (65dBf, IHF) : | 77dB (mono) |
| 73dB (stereo) | |
| Distortion (mono, 65dBf) : | 0,08% (100Hz) |
| 0,08% (1Khz) | |
| 0,15% (6Khz) | |
| Distortion (stereo, 65dBf) : | 0,15% (100Hz) |
| 0,1% (1Khz) | |
| 0,2% (6Khz) | |
| Intermodulation distortion (IHF) : | 0,05% (mono) |
| 0,01% (stereo) | |
| Sub-carrier product ratio : | 60dB |
| Stereo separation : | 35dB (50Hz) |
| 50dB (1Khz) | |
| 45dB (10Khz) | |
| Frequency response : | ± 0,3dB (50Hz to 10Khz) |
| ± 0,5dB (30Hz to 15Khz) | |
| +0,5 / -3dB (10Hz to 18Khz) | |
| Muting threshold : | 14,8dbF / 3µV |
| 34,8dbF / 30µV | |
| General | General |
| Semiconductors : | 109 transistors |
| 4 ICs | |
| 3 FETs | |
| 58 diodes | |
| 7 Zener diodes | |
| 5 LEDs | |
| 4 ceramic filters | |
| PS : | multivoltage (EU & JP models only) |
| PC : | 320W (360W, Canada ; 460VA) |
| Dimensions : | 54 x 16,7 x 41,5mm |
| Weight : | 18,8kg. |
| Features | |
| » logical chassis layout | |
| » Mylar film capacitors & metallic film resistors in the RIAA EQ section | |
| » Continuously variable loudness contour | |
| » Linear differential gain IF stage | |
| » 4-gang tuning capacitor with dual-gate MOS-FETs | |
| » MPX section included into NFB loop | |
| » Multi-function FM/AM/Signal/Multipath/Power meters | |
| » High-Blend switch (FM) | |
| » DOLBY adapter switch | |
| » Automatic or Manual OTS tuning system | |
| » 2x Headphone jacks for Yamaha Orthodynamic and/or normal 'phones |
Yamaha CR-1020 : 0 topic
(last updated topic shows up first)
(last updated topic shows up first)
