| Title | Value |
|---|---|
| MAIN section | MAIN section |
| Power : | 2x 330W (20Hz...20Khz, 0,03% THD, 8 Ohm) |
| 2x 330W (20Hz...20Khz, 0,03% THD, 4 Ohm) | |
| 2x 340W (1khz, 0,03% THD, 8 Ohm) | |
| 2x 360W (1khz, 0,03% THD, 4 Ohm) | |
| THD : | 0,03% (20Hz...20Khz, rated power, 4 Ohm) |
| 0,01% (20Hz...20Khz, ,half power, 8 Ohm) | |
| 0,02% (20Hz...20Khz, half power, 4 Ohm) | |
| 0,005% (20Hz...20Khz, half power, 4 Ohm) | |
| IMD : | 0,03% |
| Frequency response : | 5Hz...90Khz (-1dB) |
| S/N ratio : | 115dB |
| Residual noise : | 0,3mV |
| Damping factor : | 160 (8 Ohm) |
| 80 (4 Ohm) | |
| Input : | 1,5V / 47kOhm |
| Load impedance : | 4...16 Ohm (main OR remote) |
| 8...16 Ohm (main AND remote) | |
| PRE section | PRE section |
| Inputs : | 2,5mV / 25, 50 or 100kOhm (phono 1 & 2) |
| 150mV / 47kOhm (aux, tape 1 play) | |
| 180mV / 47kOhm (tape 2 playback, DIN) | |
| Phono overload : | 300mV (1Khz, RMS) |
| Outputs : | 1,5V / 100 Ohm |
| 3V / 100 Ohm max. | |
| 150mV / 80kOhm (tape 1&2 record out) | |
| 80mV / 80kOhm (DIN) | |
| S/N ratio : | 97dB (at 10mV input) |
| 85dB (at 2,5mV input) | |
| 100dB (line level) | |
| Frequency response : | 20Hz...20Khz (+0 / -0,3dB) |
| 5Hz...40Khz (-1dB) | |
| ± 0,2dB (RIAA) | |
| Bass control : | ± 10dB at 50Hz |
| Mid control : | ± 8dB at 1Khz |
| Mid fo : | 250Hz...5Khz |
| Treble control : | ± 10dB at 20Khz |
| Acoustic Control : | +6dB (low boost, 100Hz ; tone at 0 position) |
| +6dB (high boost, 10Khz ; tone at 0 position) | |
| Low filter : | 30Hz, 12dB/octave |
| High filter : | 8Khz, 12dB/octave |
| Loudness control : | +9dB at 50Hz (-30dB volume) |
| Muting : | -20dB |
| Sensitivity : | 10,3dBf (0,9µV 75Ohm, IHF '58) |
| 50dB quieting : | 12,8dBf (1,2µV 75Ohm, IHF '58) |
| 36,2dBf (17,7µV 75Ohm, IHF '58) | |
| THD : | 100Hz : 0,1% mono, 0,1% stereo |
| 1kHz: 0,1% mono, 0,1% stereo | |
| 6kHz: 0,2% mono, 0,2% stereo | |
| S/N ratio : | 83dB (mono) |
| 80dB (stereo) | |
| Frequency response : | 20Hz...18Khz (+0,2 / -0,8dB) |
| Alternate channel : | 85dB |
| Capture ratio : | 1,0dB |
| Image rejection at 98MHz : | 100dB |
| IF rejection at 98MHz : | 120dB |
| Suprious rejection at 98MHz : | 110dB |
| AM suppression : | 60dB |
| Stereo separation : | 50dB at 1Khz |
| 40dB at 10Khz | |
| Carrier leak : | -70dB (19Khz) |
| -70dB (38Khz) | |
| General | General |
| PC : | 640W max. |
| Dimensions : | 63 x 53,6 x 19,1cm |
| Weight : | 87,1 lb. / 39,5kg. |
| Features | |
| 2x tape monitors | |
| 2x two-way dubbing | |
| DIN rec/play jack | |
| 26-step true attenuator-type volume control | |
| 20dB audio muting switch | |
| Detented tone and balance controls | |
| Loudness switch | |
| Main + Remote speaker connections | |
| Stereo/Mono switch | |
| 2x phono inputs | |
| 2x front-panel headphone jacks | |
| Program/Source LED indicators | |
| Pre-out/Main-in jacks | |
| Mirror-reflection tuning scale | |
| 2x tuning meters | |
| FM-stereo indicator | |
| F-type 75Ohm antenna connector | |
| AM ferrite bar antenna | |
| 2x ground terminals | |
| Simulated wood sides | |
| Jacks for adding QUAD FM and Stereo AM, should these become available |
Technics SA-1000 : 0 topic
(last updated topic shows up first)
(last updated topic shows up first)
