Luxman L-114

Circa
1 9 8 0 c.1980
1 9 8 1 1981

Rare export-only (?) integrated amp with serious circuits but quickie industrial quality, the L-114 is visually related to the C-120A period (in european matte version) and the smaller sibling of the L-116A.

Duo-ß circuits for both amp and low-noise PNP phono stage, dedicated ±42V eq power-supply, DC amp with high fT and low collector output, tone control section placed within the final stage (no flat amp), a minimum of wiring, a big fat low-leakage trafo and a double-row of sharkfin heatsinks.

Simple.







A nudie here, with a schematic diagram printed on the single board.

Luxman L-114, image 1
Luxman L-114 specifications
Title Value
Power output : 2x 48W (8 Ohm, both channels driven ; 0,02% THD)
Frequency response : 20Hz...20Khz (MM, ± 0,5dB)
Inputs : 2,5mV / 50kOhm (MM)
150mV / 50kOhm (aux, tuner, monitor)
Maximum phono input : 130mV (0,05% THD)
S/N ratio : > 92dB (MM, for 10mV input)
> 87dB (MM, IHF-A)
> 100dB (lines, IHF-A)
Residual noise : < 0,5mV
Bass control : +8dB...-10dB at 70Hz
Treble control : +8dB...-10dB at 14Khz
High cut filter : 6dB/octave above 7Khz
Low cut filter : 6dB/octave below 70Hz
Phono subsonic : 6dB/octave below 30Hz
Dimensions : 43,8 x 11,1 x 30,6cm
Weight : 8,1kg.
page online since : april 2012
page updated : not yet
page type : LGT / KNB
page weight : 104.04 Kb / 0 b
  • TVK Talk Forum
  • TVK Museum
  • Specials
  • Timelines
  • Utilities
  • Games